Back to TEST features.
Open Specific Steady-State Devices>HVAC back
Moist air at 40oC and 90% R.H. enters a dehumidifyer at the rate of 300 m3/min. The condensate and the saturated air exit at 10oC through separate exits. The pressure remains constant at 100 kPa. Determine (a) the mass flow rate of dry air, (b) the water removal rate, and (c) the required refrigeration capacity, in tons. 

What-If Scenario:  How does the line look if p=1000 kPa? 

Solution: Step-by-step instructions as well as the TEST-Code can be found in the Tutorial>Daemons>HVAC>Practice page. An image of the special device Analysis panel is shown below.